dip and d subminiature jumpers note: aries specializes in custom design and production. in addition to the standard products shown on this page, special materials, platings, sizes, and configurations can be furnished, depending on quantities. aries reserves the right to change product specifications without notice. ordering informa tion cable det ail header det ail xxx-xxx-xxx no. of contacts (?d? connector) cable length in inches: ?d? to dip=2? [50.80mm] min/.ex: 2? = -002-/ 2.5?= -002.5- ?d? to ?d?=3? [76.20mm] min/.ex: 3? = -002-/ 3.5?= -003.5- no. of termination contacts termination style (a, b, c, d, e, or m, f for male or female ?d? connector) m=male ?d? connector f=female ?d? connector ? a?=(no. of pins per row x .100 [2.54]) + .095 [2.41] ?b?=(no. of pins per row - 1) x .100 [2.54] ?c?=.390 8-16 pin dip; .690 24-48 pin dip ?d?= .300 8-16 pin dip; .600 24-48 pin dip ?w?=(no. of conductors x .050 [1.27]) + .005 [.08] ?y?=(no. of conductors - 1) x .050 [1.27] see data sheet 11017 for other configurations and additional information. numbers shown pin side for reference only. style a style b features: ? aries offers a wide array of dip/d subminiature jumper configura- tions and wiring possibilities for all your programming needs. ? reliable, electronically tested solder connections. ? cable is potted to provide strain relief. ? protective covers are also provided on headers. ? 10-color cable allows for easy identification and tracing. ? 9 pin ?d? connector available with 8 or 14 pin header. ? 15 pin ?d? connector available with 14 or 16 pin header. ? 25 pin ?d? connector available with 24 pin header. ? 37 pin ?d? connector available with 40 pin header. ? 50 pin ?d? connector available with two 24 pin headers. ? consult factory for jumper lengths under 2.000 [50.80]. header specifications: ? header body is red ul 94-hb glass-filled nylon. consult factory for ul 94v-0 rated material. ? header pins are brass, 1/2 hard. ? header pin plating is 10 [.25 m] min. gold per mil-g-45204 over 50 [1.27 m] min. nickel per qq-n-290. d-subminiature connector specifications: ? insulator is ul 94v-0 flame-retardant thermoplastic. ? contacts are copper alloy. ? contact plating is 100 [2.54 m] min. gold over nickel. cable specifications: ? insulation is ul style 2697 polyvinyl chloride (pvc). ? laminate is clear pvc, self-extinguishing. ? conductors are 28 awg, 7/36 strand, tinned copper per astm b 33. ? current rating=1 amp @ 10c [50f] above ambient. ? voltage rating=300 volts. ? temperature rating=176f [80c]. ? capacitance=13.0 pf/ft. [42.7pf/meter] nominal @1 mhz. ? crosstalk: 10? sample, 5 ns rise time with 2 lines driven. near end=4.7%; far end=4.3% nominal. ? propagation delay=1.5 ns/ft. [4.9 ns/meter] nominal. ? insulation resistance=1010 ohms (10 ft. [3 meters] min.). mounting considerations: ?suggested pcb hole size=.033 .002 [.86 .05]. a ll dimensions : inches [ millimeters ] all tolerances .005 [.13] unless otherwise specified ?l? .125 ?l? .125 printouts of this document may be out of date and should be considered uncontrolled north america frenchtown, nj usa tel: (908) 996-6841 fax: (908) 996-3891 uk/ireland/gb tel: +44 870 240 0249 fax: +44 1653 690980 uking@arieselec.com europe/mainland/holland tel: +31 78 615 94 65 fax: +31 78 615 43 11 europe@arieselec.com http://www.arieselec.com ? info@arieselec.com 11016 rev.d ?c? ? d? .003
|
